2014 High Qualtiy FULL-FRAME SENSOR CLEANING ROD for Phone ,LCD ,Eyewear,Glasses,Camera
Item code: VSGO-D-10170
Register Date: 2013.09.06
Type: paper box
Dimensions: 21.4*12*1.7cm
Products composition
composition:full-frame sensor cleaning rod: 24mm×6pcs
Using method
1. Choose a clean area which is dustless, and adjust camera to cleaning mode, remove lens and expose the camera sensor.
2. Use the professional VSGO air blower to blow dust away
3. Open the vacuum package and take out the cleaning rod. Please put the tongue piece of rod at about 60 angle with sensor surface. Make the tongue piece forming
a cleaning face with sensor, then gently pull or push from one site to the other. Then reversal cleaning rod and repeat the above operation.
4. Change a new rod and repeat step 3 until CCD/CMOS or lens clean.
5. If stubborn stain remain, cleaning can be proceed with sensor cleaner. 1-2 drops cleaner on the new opened tongue piece of rod, then use the slight wetted
tongue piece to clean sensor or reflector, and wipe sensor/reflector again with another new opened dry rod to absorb the probable remained cleaner.
6. Exist clean mode after cleaning and turn off the power. Put camera in a safe and dry camera bag or cabinet.