2014 sensor cleaning professional kit for Digital Camera Lens Filters LCD

Item code: VSGO-D-15128

Register Date: 2013.09.06

Type: paper box

Dimensions: 18.3*17.8*6cm

Products composition

integrated hurricane air blower ×1pcs

sensor cleanser:30ml×1pcs

APS-C frame sensor cleaning rod: 16mm×6pcs

dust free finger-cot: 4pcs per pack×2 pack

Using Method

1. Choose a clean area which is dustless, and adjust camera to cleaning mode, remove lens and expose the camera sensor.

2. Use integrated hurricane air blower to blow dust away

3. Open the vacuum package and take out the cleaning rod. Please put the tongue piece of rod at about 60 angle with sensor surface. Make the tongue piece forming a cleaning face with sensor, then gently pull or push from one site to the other. Then reversal cleaning rod and repeat the above operation.

4. Change a new rod and repeat step 3 until CCD/CMOS or lens clean.

5. If stubborn stain remains, cleaning can be proceed with sensor cleaner. 1-2 drops cleaner on the new opened tongue piece of rod, then use the slight wetted tongue piece to clean sensor or reflector, and wipe sensor/reflector again with another new opened dry rod to absorb the probable remained cleaner.

6. The after used cleaning rod can also used to clean camera body、screen、touch spot and the seam of lens cap. Convenient and useful.