YONGNUO FLASH SPEEDLIGHT YN468-II For Nikon D7000 D5000 D5100 D3000 D3100 D300 D300s D200 D90 D80 D70s D60 D40x D40

Item code: YONGNUO-YN468-II

Register Date: 2013.10.11

Color: black

Product specifications

* 33,TTL automatically adjusts the Flash index index, or m manual grade adjustment

* Automatic zoom

*LCD LCD display

* Strobe

*S1 light trigger

*S2 pre-flashing light control to avoid triggering

*Rotation angle: -7~90 up and down, left and right 0~270,

* Fits SB800 soft light box, comes with a reflector, diffusion plate

Features
a), New Battery Compartment
 The 4 batteries are now all in a row with a latch that flips open. This looks like a much better design now, no more acrobatics required for a battery exchange.
b),Improved Optical Slave Sensor ( Located on the front side of the flash, underneath the red plastic screen )
"S1" mode --- it is used with manual flash or Studio flash.
"S2" mode --- it is designed for digital TTL flash. This mode is similar with S1 mode, but it can neglect the pre-flash given by TTL flash. Therefore, it can support the mainflash working in TTL mode.
The range is a little longer and the sensitivity is better than the 1st generation.
c),Improved (Laser) AF Assist Light
With the much improved AF assist light of YN-468 II, it can help the camera find focus in darkness, and there's a bright red pattern projected now which helps much better with low-contrast subjects although it's still limited to the center AF field.
d), PC Sync Port
We built a PC sync port in the side of the YN-468 II, you can not only trigger the flash through the flash foot, or with the optical slave modes, but also through a PC SyncCable.
e), Improved Buttons Design
It is sensitivity and better feeling to control.
And here are some other features:
1), TTL mode
The metering system of this camera will detect flash illumination reflected back from the object so as to automatically control flash output in this mode.
In this iTTL mode, you can also make compensation of flash brightness with the " Output control knob" within the range of ±3 ev, with the precision of 1/3 ev. ( Only with this feature the camera-flash combination can give you correctly exposed flash photographs automatically.)
2), Auto Zoom
The flash speedlite will move forward and backward with the changes of lens focus to suit different illumination zones when it is mounted on the camera which supports iTTL Function, the zoom range is 24mm - 85mm.
You also can set the focus position for the light head manually by pressing the mode switch button + Power button.
3), Multi Mode
It's the stroboflash mode, the flash light will output the power, flash frequency and time flash you have set.
4), M mode
You can set flash luminance as per your favorite, luminance level will be displayed by luminance indicator. When taking photos, you only require setting the flash luminance,adjust the camera and press the shutter, the flash light will flash under the camera synchronous signal.
5), S1 Mode
It will work with the first work of the master flash synchronously in this mode, with the result consistent with the use of radio slave. ( When you use this mode, your master flash should be set at manual flash, the TTL flash system with pre-flash function and the red-reduction function with multiple flashes should not be used.)
6), S2 Mode
It is very similar to S1 mode, but it can support the master flash in TTL mode. In particular,  if S1 mode can not have correct and synchronous flash with the inbuilt flash, you can try to use S2 mode.

Advanced Application:
a), Multi-Lamp Lighting Application
b), Exposure Bracketing ( FEB)
c), Use Wide-angle Diffuser
d), Rear-curtain Sync
e), FV Lock ( This function can only be available when your camera supports it, for the setting of FE lick, refer to your camera manual
f), Application of AF LED
g), Exposure Compensation
h), Reflection Flash
i), Use Reflection Board to take photos

Compatibility:
Suit for Nikon D7000 D5000 D5100 D3000 D3100 D300 D300s D200 D90 D80 D70s D60 D40x D40