2014 new APS-C sensor cleaning rod kit for ILDC,Keyboard, the computer screen, glasses
Item code: VSGO-D-15330
Register Date: 2013.09.06
Type: paper box
Dimensions: 21.3*13.8*2.5cm
Products composition
PS-C frame sensor cleaning rod:16mm×10pcs
sensor cleanser:10ml×1pcs
Using Method
1. Choose a clean area which is dustless, and adjust camera to cleaning mode, remove lens and expose the camera sensor.
2. Use the professional VSGO air blower to blow dust away
3. Open the vacuum package and take out the cleaning rod. Please put the tongue piece at about 60 angle with sensor surface. Make the tongue piece forming a cleaning face with sensor, then gently pull or push from one site to the other. Then reversal cleaning rod and repeat the above operation.
4. Change a new rod and repeat step 3 until CCD/CMOS or lens clean.
5. If stubborn stain remains, cleaning can be proceed with sensor cleaner. 1-2 drops cleaner on the new opened rod tongue piece, then use the slight wetted tongue piece to clean sensor or reflector, and wipe sensor/reflector again with another new opened rod to absorb the probable remained cleaner.
6. Please exit the cleaning mode after sensor cleaning completed. Turn off the power and install lens on. Put camera in a dry and safe camera bag or camera cabinet.