2014 Free Shipping!WIFI Bridge for Xbox IP Camera all network equipment
Item code: Vonets-VAP11G
Register Date: 2013.09.17
Specifications：Support WiFi model.
Consumed Power: Less than 1.5W Support VoIP ATAs&VoIP Phone
Wifi Bridge introduction：
*Wifi Wireless Dongle Bridge for ip camera or network receiver ,
*Wifi Home plug! Power Line Communication!
*To experience the high speed broadband networking with your existing power lines
*10/100 fast Ethernet interface connection
*Physical rate up to 85Mbps or 200Mbps according to different item number
*The power line communication can operate with any ethernet-enabled device, such as desktop computer, network printer, laptop computer, Router, ADSL, or a security camera.
*It is operating system independent and can be used with any Microsoft Windows, Linux or operating system. By applying this powerful and higher speed networking solution, you just need to plug this adapter into AC power socket and then connect it to PC's Ethernet port. Through the wider bandwidth support.
*Efficient data flow streaming is become the reality for people and led human in the real digital life style.
*Product key performance indicators are as follows:
*Support for Wifi bridge mode
*To add a USB port to connect a computer (desktop, laptop) to enhance the power,if the power is enough,no need the USB port, no need extra power adapter for this product!
*Consistent with IEEE 802.11B / G wireless network transmission protocol;
*Supports WEP (64 bit), WEP (128 bit), WPA, WPA2 encryption;
*Support for SSID broadcast.
*Accessibility wireless transmission 100 meters
*A standard RJ45 Ethernet connector
*Three parallel DC power supply, take electrical interface
*Wide input voltage: DC5V-15V, Low Power: <1.5W, with the majority of IP devices to share power benxyh on hotmail
Small business networking
Internet home networking, game consoles, home appliance connection
Extends the range of your wireless devices
To eliminate long cable runs through your home
IPTV \ ip camera \ net game box \ net receiver video streaming application
1. please note don't turn the input power on and the usb port to pc together!!!otherwise the pc will restart again,only connect the usb port to pc and connect the pj45 lan port to pc set the wifi device is ok,only the use port and the pj45 port connect to the pc!
2. set the wifi password,
3. to use your equipment power such as the receiver power to as the wifi bridge input power and use the wifi bridge out power to drive the receiver and connect the rj45 port is ok,your receiver will work on wifi wireless net.