Special preferential outfit 9-in-1 camera cleaning & maintence kit crazy ver

Item code: VSGO-D-15880

Register Date: 2013.09.06

Type: paper box

Dimensions: 21.3*21.2*6cm

Products composition

lens cleanser: 60ml×1pcs

sensor cleanser: 10ml×1pcs

ultramicro fiber cleaning cloth: 23cm×23cm×1pcs

APS-C frame sensor cleaning rod: 16mm×20pcs

hurricane air blower: 1pcs

high level brush: 1pcs

professional lens pen:1pcs

dust free cotton swab  8pcs per pa

Using Method

1. Choose a clean area which is dustless, wearing gloves and removing lens, adjust camera to cleaning mode, lock up reflector.

2. Use cleaning brush gently sweep of dust on camera or screen; Use the professional VSGO air blower to blow dust away.

3. Open the vacuum package and take out the cleaning rod. Please put the tongue piece of rod at about 60 angle with sensor surface. Make the tongue piece forming a cleaning face with sensor, then gently pull or push from one site to the other. Then reversal cleaning rod and repeat the above operation.

4. If stubborn stain remain, cleaning can be proceed with sensor cleaner. 1-2 drops cleaner on the new opened tongue piece of rod, then use the slight wetted tongue piece to clean sensor or reflector, and wipe sensor/reflector again with another new opened dry rod to absorb the probable remained cleaner.

5. Use lens pen to clean lens: screw out the carbon powder site, straightly and gently put it on the lens center, then wiping clockwise.

6. Exist clean mode after cleaning and turn off the power. Put camera in a safe and dry camera bag or cabinet.